So, when you are creating attractive and detailed prints on your DTF printer, it is extremely crucial that the powder shaker is adjusted properly. The powder shaker lays down a fine layer of powder over the printed design, and assists the ink in sticking, so it doesn't blur or smudge, and allows for clear images. If your powder shaker is not calibrated you will have some areas where too thick layer is distributed and some which are too small and that could lead to bad print quality and wasted material. To ensure your DTF printer works to the best of its ability, you need to calibrate your powder shaker frequently.
Calibrating your DTF powder shaker may sound difficult, but it is actually easy with the right methods and equipment. Below are a few steps to help you calibrate your powder shaker properly:
Begin by adjusting the speed and power-ratings of your powder shaker according to the manufacturer’s directions. This will help spread the powder evenly on the print area.
It's very important to calibrate your DTF powder shaker for a successful distribution of the powder on your print. And after the powder turns flowing and shiny, the ink is colorised despite of large area to colorize, and it is incredible well to stick. Good calibration even saves material as it makes sure the appropriate amount of powder is consumed by a print. If set powder shaker is dropping the powder too much, you can get good enough printing quality and make your DTF printer WORK BETTER, if you will take the time to determinate the “right value” for both.
Calibration is just a shot away: It’s possible that some powder shaker users will not understand just how vital calibration is for their print – at the very least, stepping on the print quality and wasting materials.
Prevent these errors And continue to follow the calibration process in detail You will be able to bring to ensure that their device powder DTF shaker adventure works properly.
DTF powder shaker calibration isn't just for accuracy in powder distribution, it's also how you get your pre-treatment machine to work properly. A properly tuned powder shaker can assist in faster printing, less waste, and better print quality. By regularly checking your powder shaker and using the recommended methods, you can maximize the use of your DTF printer and make fantastic designs with ease.