×
Ever wondered how cool designs are printed on t-shirts and other fabrics? One little helper for this is the DTF Powder Shaker. This little gizmo works to smooth powder evenly across a printed design before it’s heat-set on to fabric. How to lay DTF Powder with a DTF Powder Shaker (Step By Step) And if you're interested to learn how to use a DTF Powder Shaker, You're reading the step by step guide!
Here’s how I did it.The first is to make your design. Print out your favourite image onto some special transfer paper with a printer. Make certain that the ink is thoroughly dry before proceeding to the next step.
Now we get to use the DTF Powder Shaker! Fill the shaker of your choice with the DTF powder of your choosing. Shake it lightly onto your print design. Be sure to cover the entire design with a light dusting of the powder.
And lastly, just heat press your design to the fabric. Lay your powdered design (face down) onto the fabric, and heat press the powder as you would for its type. When finished, peel off the transfer paper to reveal your awesome design!
How to extract: 1Pull out the plug of the DTF Powder Shaker and let it fill with powder. With these steps and advice, you too can produce fine prints. Experiment with powders and techniques that you prefer best!
If you use an old or cheap-quality DTF powder, it will lose its luminance and the prints may look boring. Fresh, good powder should always be used for best results.
Learning how to use a DTF Powder Shaker can be a little difficult for some one new to DTF printing. But with a little practice, you’ll learn how to use it and you will produce the most amazing designs! Let them start with small projects and work their way up to larger ones. Be unafraid to try out some new ideas and see what seems and feels most pleasing to you. You’ll be great at DTF printing with a little practice!
